CELLS
 | FC2 | Flow cell FC2 enables the use of AC1 and CC1 sensors in a flow through arrangement. The cell ensures the wall-jet flow around the working electrode and also contains the contact and output cable. |  | 156 € |
| | FC3 | Flow cell FC3 enables the use of AC1, AP1 and CC1 sensor together with illumination of the working electrode. Just below the working electrode there is an LED diode, which can be used to stimulate the processes on the working electrode. The sensor is inserted into the body of the cell and tightened by closing the door. This cell also contains the contacts and output cable. | | 412 € |
 | FC4 | The FC4.* flow cell is made of PEEK. It has teflon endings permitting a fully compatible connection to chromatography tubing. The flow cell enables the use of AC1, AP1, and CC1 sensor in a flow-through arrangement. The sensor is inserted into the cell compartment (face downward), the lid is closed and tightened by the screw. The wall-jet flow around the working electrode and is optimized to avoid bubbles. The cell contains also the contact and output cable. | | 347 € |
 | FC9 | Flow cell FC9 enables the use of the AC9 electrochemical array sensor in a flow through arrangement. The sensor is inserted into the body of the cell and tightened by closing of the door. This cell ensures a reproducible flow around all 8 working electrodes. The principle is similar to a rotating disc electrode and the cell also contains the contact and output cable. | | 1800 € |
 | TC2 | A simple glass cell for electrochemical measurements with a jacket which enables thermostat control. | | 82 € |
 | TC3 | A simple jacketed glass cell for electrochemical measurements with miniaturised classical electrode types WCE, RCE and ACE. The cell has a lid with 4 holes to insert electrodes into the cell. | | 82 € |
 | TC4 | Simple glass cell serves for electrochemical measurements. The temperature of the analysed solution can be controlled when placing the cell in MT-1 thermostat. Cell openings are designed for stirrer ST1 and connector KA1C.*,KA2C for electrochemical sensor AC1 or classical minielectrodes WCEc, ACEc and RCEc. | | 110 € |
 | TC5 | Glass cell serves for electrochemical measurements. The cell is jacketed. The analyzed solution can be thermostated by external thermostat. Cell openings are designed for stirrer ST1 and connector KA1C.*,KA2C for electrochemical sensor AC1 or classical minielectrodes WCEc, ACEc and RCEc. | | 110 € |
 | TC6 | Glass cell serves for electrochemical measurements. The analyzed solution can be thermostated by external thermostat MT1. Cell openings are designed for stirrer ST1 or mini RDE and connector KA1C.* for electrochemical sensor AC1 or classical minielectrodes WCEc, ACEc and RCEc. The device enables the measurement with inserted samples | | |
 | WI | Flow cells FC2, FC3 and FC4 can be fouled by buffer salts, standard or sample substances especially in the tubing that brings measured liquid to the sensor. The salts embed namely in the edges of drilled openings. It causes decrease of the flow area, thereby flow rate. These negative influences decrease the signal and measurement reliability. Most frequently it happens when high salt concentration solutions or solutions with impurities are used. The flows cell can be washed by pressured water using syringe. | | 31 € |
| For more information please contact | |
|
| E-mail: info (at) bvt.cz |
| Tel.: + 420 563 034 298 | |
| Strážek 206, 592 53 STRÁŽEK | |
| Czech Republic | |
