ELECTROCHEMICAL SENSORS
 | STK | Starting kit is the set of twenty different electrochemical sensors to find the best one to fit your application. Starting kit contains 10 types of electrochemical sensors (2 sensors of each type), sensors connector KA1s.S. and sensors box with numbered positions and silica gel. |  | 39 € |
 | AC1 | The most used 3-electrode sensor with working, reference and auxiliary electrodes. This sensor is used as a substrate for glucose oxidase or acetylcholine esterase biosensor preparation (AC1.GOD, AC1.AChE). | | 1.9 €/pc min. 25pcs |
| AC1. AChE | Acetylcholinesterase biosensor. Acetylcholinesterase from electric eel type VI-S is immobilised on a w electro chemical sensor. Working electrode of AC1.W2.RS. The diameter of the immobilised bioactive membrane is 2 mm and the mean applied activity is 1 unit per mm². | | 4 €/pc min. 25pcs | |
| AC1. GOD | Glucose Oxidase biosensor. Glucose Oxidase (GOD) from Aspergillus Niger is immobilised on a working electrode of AC1.W2.RS electrochemical sensor. The diameter of the immobilised bioactive membrane is 2 mm and the mean applied activity is 1 unit per mm². | | 4 €/pc min. 25pcs | |
|
| AC1P | New type of the AC1P sensors (HIGH QUALITY SURFACE ELECTROCHEMICAL SENSOR) are formed on a corundum ceramic base. On to this surface the working, the reference and the auxiliary electrodes are applied. Working electrode has homogenous surface with roughness less than 1 μm. This specific AC1P sensors enable antibodies immobilization and nanostructures preparation. | | 7 €/pc min. 5pcs |
 | MAC1 | The sensor MAC1 is formed on a corundum ceramic base. Onto this surface the working, the reference and the auxiliary electrodes are applied. The working and the reference electrodes are made of variety of materials. Active part of the sensor is placed in a small microreactor with lid. At the end of the sensor there is a contacting field which is connected with the active part by the silver conducting paths which are covered by a dielectric protection layer. A bio-chemically active substance can be immobilised on the working electrode of the sensor to create a biosensor. | | 2.5 €/pc min. 25pcs |
|
| AC2 | An electrochemical sensor with 2 working electrodes and 1 reference electrode allowing differential measurement of two signals at once. | | 1.9€/pc min. 25pcs |
|
| AC3 | A narrow single working electrode sensor designed to replace metal electrodes made from expensive materials. | | 3 €/pc min. 20pcs |
|
| AC4 | A single working electrode sensor with a bigger metal surface area compared to the AC3. It may serve for metal coating. | | 17 €/pc min. 25pcs |
|
| AC5 | An array of 8 working electrodes. Each electrode has its own reference electrode. It is possible to measure eight signals at once. | | 21 €/pc min. 5pcs |
|
| AC6 | An electrochemical sensor with 1 working, 1 reference and 2 auxiliary electrodes. | | 2.5 €/pc min. 25pcs |
|
| AC7 | This sensor is a shorter version of the AC1. It is intended for a different connector with soldered pins. | | 1.9 €/pc min. 25pcs |
|
| AC8 | An electrochemical sensor with 4 working electrodes. Some of them may be modified by enzyme, DNA, antibody, etc. for multi-analyte detection. | | 4.5 €/pc min. 10pcs |
|
| AC9 | An electrochemical sensor with an array of 8 working electrodes and 1 common reference electrode. It was designed as a biosensor substrate for multi-analyte detection. | | 7.7 €/pc min. 5pcs |
 | AC9C | The sensor is formed on a corundum ceramic base. On to this surface eight working electrodes, and the reference electrode are applied. The electrodes can be made of variety of materials. At the end of the sensor there is an integrated connector. It is connected with the active part by the silver conducting paths which are covered by a dielectric protection layer. A bio-chemically active substance can be put on the working electrodes of the sensor. | | 11 €/pc min. 5pcs |
|
| AC10 | An electrochemical sensor with an array of 20 working electrodes and 1 common reference electrode. It was designed for the complicated complex analysis of 20 analytes in one step. | | 27 €/pc min. 5pcs |
 | AC13 | The sensor is formed on a corundum ceramic base. On to this surface the working, the reference and the auxiliary electrodes are applied. The working and the auxiliary electrodes are made of variety of materials. At the end of the sensor there is a contacting field which is connected with the active part by the silver conducting paths which are covered by a dielectric protection layer. A bio-chemically active substance can be immobilised on the working electrode of the sensor to create a biosensor. | | 4.5€/pc min. 10pcs |
|
| CC1 | A Conductivity measurement sensor with finger structure of electrodes | | 3.5 €/pc min. 25pcs |
|
| CC2 | A conductivity measurement sensor designed for differential measurements of conductivity on the background of another effect. | | 1.5 €/pc min. 25pcs |
| For more information please contact | |
|
| E-mail: info (at) bvt.cz |
| Tel.: + 420 563 034 298 | |
| Strážek 206, 592 53 STRÁŽEK | |
| Czech Republic | |
